TXS0104ERGYR-Texas Instruments Components

TXS0104ERGYR-Texas Instruments Components


The TXS0104ERGYR device supplied by Xt-shenzhen is an original supply channel from Texas Instruments. Quality and price have obvious advantages compared to other suppliers. The TXS0104ERGYR device is a 4-bit bidirectional multi-voltage point-to-level converter for open-drain and push-pull applications. For more information about Texas Instruments TXS104E series devices, please contact xt-shenzhen for your service.

The TXS0104ERGYR device uses two independent configurable power rails, which is an advantage of the device as a 4-bit bidirectional converter chip. The A port is designed to track VCCA. VCCA supports any supply voltage from 1.65V to 3.6V. The B port is designed to track VCCB. VCCB supports any supply voltage from 2.3V to 5.5V. Note that VCCA must be lower than or equal to VCCB. When the output enable (OE) input is low, all outputs are placed in a high impedance state. To ensure a high impedance state during power up or power down, the TXS0104ERGYR device is designed to power the OE input circuit from VCCA.

• No directional control signal required
• Maximum data rate
–24Mbps (push-pull)
–2Mbps (open drain)
• Available in Texas Instruments (TI) NanoFree™ package
• Port A supports voltage from 1.65V to 3.6V, port B supports voltage from 2.3V to 5.5V (VCCA≤VCCB)
• No power sequencing required
– Either VCCA or VCCB can be ramped up first
• Latch-up performance exceeds 100mA per JESD 78 Class II specification
• ESD protection performance exceeds JESD 22 specification requirements
–A port
• 2000V Human Body Discharge Model (A114-B)
• 200V machine model (A115-A)
• 1000V charging device model (C101)
–B port
•15kV Human Body Model (A114-B)
• 200V machine model (A115-A)
• 1000V charging device model (C101)
•IEC 61000-4-2 ESD (Port B)
–±8kV contact discharge
–±10kV air gap discharge

Supply voltage (DC)1.65V (min)
Number of circuits1
number of channels4
Number of pins14
number of digits4
data rate24.0 Mbps
input number4
Operating temperature-40℃ ~ 85℃
Number of output channels1
Power supply voltage (Max)5.5V
Power supply voltage (Min)1.65V
Installation methodSurface Mount
Number of pins14
PackingTape & Reel (TR)
has been added to your cart: