TXS0102DCTR-Texas Instruments
$0.22
- 描述
- 询问
描述
The TXS0102DCTR device designed and developed by Texas Instruments is a voltage level shifter chip. Excellent performance, favored by the majority of manufacturers.Texas Instruments, as the main product of xt-shenzhen, can supply high-quality electronic components to global manufacturer customers. You are welcome to contact xt-shenzhen company to serve you at any time! ! !
这 TXS0102DCTR is a bidirectional voltage level translator that can be used to create digital switch compatibility between mixed voltage systems. It uses two independently configurable power rails capable of supporting lower and higher logic signal levels. 同时, the TXS0102DCTR can arbitrarily perform bidirectional conversion between 1.8V, 2.5五, 3.3V and 5V voltage nodes. All inputs/outputs are in a high-impedance state when the output-enable (原始设备制造商) input is low. To ensure a high-impedance state during power-up or power-down, connect OE to ground through a pull-down resistor.
• No direction control signal required
• Maximum data rate
– 24Mbps (push-pull)
– 2Mbps (open drain)
• Available in Texas Instruments NanoStar™ package
• Port A supports voltage from 1.65V to 3.6V, port B supports voltage from 2.3V to 5.5V (VCCA≤VCCB)
• VCC isolation feature: If either VCC input is grounded (GND), both ports are in a high-impedance state
• Ioff supports partial shutdown mode operation
• Latch-up performance exceeds the 100mA required by the JESD78 Type II specification
• Electrostatic discharge (静电放电) protection exceeds the requirements of the JESD22 specification
电源电压 (直流) | 1.65五 (分钟) |
回路数 | 1 |
通道数 | 2 |
引脚数 | 8 |
位数 | 2 |
数据速率 | 24.0 兆比特/秒 |
输入数量 | 2 |
工作温度 | -40℃~85℃ (每) |
Number of output channels | 1 |
电源电压 (最大限度) | 5.5五 |
电源电压 (敏) | 1.65五 |
安装方法 | 表面贴装 |
封装 | SSOP-8 |
包装 | 胶带 & 卷轴 (TR) |
制造应用 | 消费类电子产品, 多媒体, Sensing and Instrumentation, Metering, 能源管理, Motor Drive and Control, Portable Equipment, Communication and Networking, Medical |
RoHS标准 | 符合 RoHS 标准 |