STM32F103CBT6-STMicroeletrônica
$1.40
- Descrição
- Investigação
Descrição
The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, Por favor, entre em contato conosco! ! !
The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.
●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Clock, reset e gerenciamento de energia
– 2.0 para 3.6 V potência da aplicação e E/S
– POR, PDR and programmable voltage
32 kHz oscillator for RTC with calibration
•low power
– Sleep, Stop and Standby modes
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (até 16 channels)
•DMA
– 7-channel DMA controller
– Peripherals supported: Timer, ADC, IPS, I2C and USART
•Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug mode
– Serial Wire Debug (SWD) and JTAG interface
• 7 temporizadores
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
– Time generation and emergency stop
– 2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports
frequency | 72MHz |
Tensão de alimentação (CC) | 2.00V (min) |
Tensão operacional | 2V ~ 3.6V |
Número de pinos | 48 |
Frequência do relógio | 72MHz |
tamanho da RAM | 20KB |
número de dígitos | 32 |
Poder dissipado | 363 mW |
Capacidade de memória FLASH | 128KB |
Conversão de analógico para digital (ADC) | 2 |
Número de entradas/saídas | 37 Entrada |
Temperatura de operação | -40℃ ~ 85 ℃ (VOLTADO PARA) |
Poder dissipado (Máx.) | 363 mW |
Método de instalação | Montagem em superfície |
pacote | LQFP-48 |
Embalagem | Bandeja |