MCP23S17-E/SS Microchip Components
$2.10
- Opis
- Zapytanie
Opis
The MCP23S17-E/SS device is a product of Microchip Corporation. This product is a 16-bit SPI I/O expander with a serial interface. This product has always been very popular in the market! Welcome new and old customers to buy this product from XT-ShenZhen! It will be our great honor!
The MCP23S17-E/SS devices provide 16-bit general purpose parallel I/O expansion for SPI applications. The serial interface of this product differs from the MCP23017 device.
There are multiple 8-bit configuration registers for input, output and polarity selection in MCP23S17-E/SS devices. By writing to the I/O configuration bits (IODIRA/B), the system host can enable I/O as input or output. Input or output registers hold input or output data. The registers can be read by the system host.
• 16-bit remote bidirectional I/O port
– I/O pins default to input
• High-speed I2C™ interface (MCP23017)
– 100 kHz
– 400 kHz
-1.7MHz
• High-speed SPI interface (MCP23S17)
– 10 MHz (max.)
• Three hardware address pins to allow up to eight devices on the bus
• Configurable interrupt output pins
– Configurable as active-high, active-low or open-drain
• INTA and INTB can be configured to operate independently or together
• Polarity Inversion registerto configure the polarity of the input port data
• External Reset input
• Low standby current: 1 μA (max.)
Częstotliwość | 10 MHz |
Napięcie robocze | 1.8V ~ 5,5 V |
Napięcie wyjściowe | 1.8V ~ 4.5V |
Prąd wyjściowy | 25 mama |
Prąd zasilania | 1 mama |
Liczba kanałów | 1 |
Częstotliwość zegara | 10 MHz |
Ilość cyfr | 16 |
Rozproszona moc | 700 mW |
Liczba wejść/wyjść | 16 Wejście |
Temperatura robocza (Maks) | 125 ℃ |
Temperatura pracy(min) | -40 ℃ |
Napięcie | 1.8V ~ 5,5 V |
Napięcie zasilania (Maks) | 5.5 V |
Napięcie zasilania (min) | 4.5 V |
Napięcie wejściowe | 1.8V ~ 5,5 V |
Szpilki | 28 |
Pakiet | SSOP-28 |