VNH5050ATR-E STMicroelettronica
$37.50
- Descrizione
- Inchiesta
Descrizione
As a powerful original chip supplier, xt-shenzhen is particularly good at providing customers with various electronic components that are in short supply in the market. Tra loro, the VNH5050ATR-E designed and developed by STMicroelectronics is a full-bridge motor driver suitable for various automotive applications. You can rest assured to buy or learn about this electronic component in xt-shenzhen! ! !
IL VNH5050ATR-E contains a dual monolithic high-side driver and two low-side switches. Proprietary VIPower® M0 technology allows efficient integration of true power MOSFETs and smart signaling/protection circuits on the same chip. The three chips are packaged in a PowerSSO-36 TP package and mounted on an electrically isolated lead frame.The package is designed for harsh automotive environments and offers better thermal performance due to the exposed die pad.
Inoltre, its fully symmetrical mechanical design enables excellent manufacturability at the board level. The input signals INA and INB can be connected directly to the microcontroller to select the motor direction and braking conditions.One branch of the bridge is enabled when DIAGA/ENA or DIAGB/ENB is connected to an external pull-up resistor. Each DIAGA/ENA also provides digital diagnostic feedback signals.
●Corrente in uscita: 30UN
3 Ingresso compatibile V CMOS
● Undervoltage and overvoltage shutdown
●Overvoltage clamp
● Spegnimento termico
●Protezione da conduzione incrociata
● Limiti di corrente e potenza
●Consumo energetico in standby molto basso
● PWM operation up to 20 KHz
●Prevention of ground loss and VCC loss
●The current detection output is proportional to the motor current
●Cortocircuito in uscita verso terra e cortocircuito verso VCC
●Pacchetto: ECOPACK®
Numero di porte di uscita | 2 |
Corrente di uscita | 30UN |
Fornire corrente | 10µA |
Numero di pin | 36 |
Ora di alzarsi | 1 µs |
tempo di caduta | 1 µs |
Temperatura di esercizio | -40℃ ~ 150 ℃ (TJ) |
voltaggio | 5.5V~18V |
Metodo di installazione | Montaggio superficiale |
pacchetto | PowerSSO-36 |
Imballaggio | Nastro & Bobina (TR) |
Applicazioni manifatturiere | grado automobilistico |