STM32F407VET6-STMicroelettronica

STM32F407VET6-STMicroelettronica

STM32F407VET6-STMicroelettronica

$3.88

In magazzino

$3.88

Descrizione

Designed and developed by STMicroelectronics, the STM32F407VET6 is a 32-bit microcontroller. The device is suitable for motor drives, application controls, applicazioni industriali, and medical equipment, among others. Such a wide range of applications makes the STM32F407VET6 one of the most in-demand chips in the market. As a powerful supplier, xt-shenzhen can provide you with all kinds of chips that are in short supply in the market. If you want to know or buy original chips, XT-Shenzhen is your ideal partner! ! !

IL STM32F407VET6 integrates innovative peripherals using a high-performance ARM® Cortex™ M4 microcontroller with Ethernet MAC and camera interface for CMOS sensors. The 32-bit flash MCU features a floating point unit (FPU) with digital signal processing (DSP) instructions and a memory protection unit (MPU) for increased application security.

STM32F407VET6 microcontroller features a crypto/hash processor with hardware acceleration for AES 128, 192, 256, Triple DES and hash (MD5, SHA-1). STMicroelectronics STM32 series is not only fast, but also ultra-low power consumption. Far beyond the performance of similar devices.

●Internal 16 RC rifinito in fabbrica MHz (1% precisione)
32 oscillatore kHz per RTC con calibrazione
●Internal 32 kHz RC con calibrazione
●Sleep, Modalità di arresto e standby
●VBAT power supply of RTC, 20×32 bit backup
● Register + optional 4 KB backup SRAM
● Controller with FIFO and burst support
● Serial Wire Debug (SWD) e interfaccia JTAG
●Cortex-M4 Embedded Micromacrocell™
●2 CAN interfaces (2.0B active)
●SDIO interface
●USB 2.0 full speed device/host/OTG
● Controller with on-chip physical layer
USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
10/100 Ethernet MAC with dedicated DMA:
●Support IEEE 1588v2 hardware, MII/RMII

frequenza168MHz
Tensione di alimentazione (DC)1.80v (min)
Tensione di esercizio1.8V ~ 3,6 V
Numero di pin100
Frequenza dell'orologio168MHz
Dimensioni della RAM196KB
numero di cifre32
Capacità di memoria FLASH512KB
Conversione da analogico a digitale (ADC)3
Numero di ingressi/uscite82 Ingresso
Temperatura di esercizio-40℃ ~ 85 ℃ (FRONTE)
Digital to Analog Conversion (DAC)1
Metodo di installazioneMontaggio superficiale
pacchettoLQFP-100
ImballaggioVassoio

    SKU: 17600
    è stato aggiunto al tuo carrello:
    Check-out