Microcontrollore STM32F303VCT6 STMicroelectronics
$13.30
- Descrizione
- Inchiesta
Descrizione
IL STM32F303VCT6 device is a high-performance MCU from STMicroelectronics. The device integrates a high-performance Arm® Cortex®-M4 32-bit RISC core. The core’s FPU operates at up to 72 MHz. XT-ShenZhen can provide you with brand stock of various MCU products. contact us! We can provide you with a perfect procurement plan.
The STM32F303VCT6 microcontroller is from STMicroelectronics. It is a mainstream mixed-signal ARM Cortex-M4 MCU with DSP and FPU. It also integrates a high-frequency CPU with 256 KB Flash 72 MHz ultra-high flash.The device also integrates various enhanced I/Os and peripherals connected to the two APB buses. The STM32F303VCT6 device also uses high-speed embedded memory with 256 KB Flash and 40 KB SRAM.
• Nucleo: Arm® Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit)
• Operating conditions:
– VDD, VDDA voltage range: 2.0 V a 3.6 v
• Memories
– 128 A 256 Kbytes of Flash memory
– Fino a 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes.
– Routine booster: 8 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM)
• Unità di calcolo CRC
• Reset and supply management
– Power-on/power-down reset (PER/PDR)
– Programmable voltage detector (PVD)
– Low-power modes: Sleep, Stop and Standby
– VBAT supply for RTC and backup registers
• Clock management
– 4 A 32 oscillatore a cristallo MHz
– 32 oscillatore kHz per RTC con calibrazione
– Internal 8 MHz RC with x 16 PLL option
– Internal 40 kHz oscillator
Frequenza | 72 MHz |
Tensione di alimentazione (DC) | 2.00v (min) |
Frequenza dell'orologio | 72.0 MHz |
Dimensioni della RAM | 40 KB |
Numero di cifre | 32 |
Potenza dissipata | 488 mW |
Conversione da analogico a digitale (ADC) | 4 |
Numero di ingressi/uscite | 45 Ingresso |
Temperatura di esercizio (Massimo) | 85 ℃ |
Temperatura di lavoro(min) | -40 ℃ |
Digital to Analog Conversion (DAC) | 2 |
Voltaggio | 2V ~ 3,6 V |
Tensione di alimentazione (Massimo) | 3.6 v |
Tensione di alimentazione (min) | 2 v |
Perni | 100 |
Pacchetto | LQFP-100 |