KSZ9031RNXIA-原装Microchip
$46.50
- 描述
- 询问
描述
The KSZ9031RNX is an automotive application interface chip designed and developed by Microchip Semiconductor Corporation. Microchip is one of the main brands of xt-shenzhen. With stable original factory channels, it can provide most of Microchip original electronic components including KSZ9031RNX devices to global customers.
这 KSZ9031RNX is a fully integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmitting and receiving data over standard CAT-5 unshielded twisted pair (UTP) 电缆. AEC-Q100 qualified for automotive applications, single-chip 10/100/1000 Mbps Ethernet transceiver best suited for IEEE 802.3 applications. RGMII timing support On-chip delay according to RGMII version 2.0 with programming option for external delay and adjustment and correction paths for TX and RX timing。
• RGMII with 3.3V/2.5V/1.8V Tolerant I/O
• Auto-negotiation to automatically select the highest link speed (10/100/1000 兆比特/秒) and duplex (half/full)
• On-chip termination resistors for differential pairs
• On-chip LDO controller supports single 3.3V supply operation – requires only one external FET to generate 1.2V for core
• Jumbo frame support up to 16 知识库
• 125 MHz reference clock output
• Energy detect power down mode to reduce power consumption when no cable is connected
• Wake-on-LAN (WOL) with powerful custom packet inspection
• Programmable LED outputs for link, activity and speed
• Baseline drift correction function
• LinkMD TDR-based cable diagnostics to identify faulty copper cabling
• Parametric NAND tree support to detect faults between chip I/O and board
• Loopback mode for diagnostics
• Automatic MDI/MDI-X crossover to detect and correct pair swapping at all speeds
• Automatically detects and corrects for pair swapping, pair skew and pair polarity
• MDC/MDIO management interface for PHY register configuration
• Interrupt pin option
• Power down and power save mode
• Triple play (data, voice, video) media center
• Media Converter KSZ9031RNX Gigabit Ethernet Transceiver with RGMII Support
电源电流 | 221 嘛 |
通道数 | 1 |
工作温度(最大限度) | 85°C |
工作温度 (敏) | -40°C |
电压 | 1.8五, 2.5五, 3.3五 |
安装方法 | 表面贴装 |
引脚数 | 48 |
封装 | QFN-48 |
包装 | 托盘 |
RoHS标准 | 符合 RoHS 标准 |
铅标准 | 无铅 |