STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

$1.40

Trong kho

$1.40

Sự miêu tả

The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, xin vui lòng liên hệ với chúng tôi! ! !

The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.

●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Clock, thiết lập lại và quản lý năng lượng
2.0 đến 3.6 V application power and I/O
– POR, PDR and programmable voltage
32 kHz oscillator for RTC with calibration
•low power
– Sleep, Stop and Standby modes
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (up to 16 channels)

•DMA

– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug mode
– Serial Wire Debug (SWD) and JTAG interface
• 7 bộ tính giờ
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
Time generation and emergency stop
2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports

frequency72MHz
Cung cấp hiệu điện thế (DC)2.00V. (phút)
Điện áp hoạt động2V ~ 3.6V
Số lượng chân48
Tần số đồng hồ72MHz
kích thước RAM20KB
số chữ số32
Sức mạnh tiêu tán363 mW
Dung lượng bộ nhớ FLASH128KB
Chuyển đổi tương tự sang kỹ thuật số (ADC)2
Số lượng đầu vào/đầu ra37 Input
Nhiệt độ hoạt động-40oC ~ 85oC (TA)
Sức mạnh tiêu tán (Tối đa)363 mW
Phương pháp cài đặtGắn bề mặt
bưu kiệnLQFP-48
đóng góiCái mâm

    Đã được thêm vào giỏ hàng của bạn:
    Thủ tục thanh toán