TXS0104ERGYR Texas Instruments Parts

تفصیل

دی TXS0104ERGYR electronics were developed by Texas Instruments (آف).It is a 4-bit bidirectional voltage level translator. It is mainly used in open-drain and push-pull applications. XT-ShenZhen has a variety of voltage level translator products in stock. Quality and origin are guaranteed. Please rest assured new and old customers!

The TXS0104ERGYR device is a 4-bit non-inverting converter. It comes with two independently configurable power rails. Its A-side interface is mainly used to track V_CCA. وی_CCA must be less than or equal to V_CCB. Its B-side interface is primarily designed to track V_CCB.
If the output enable (OE) input is low, all outputs are in a high impedance state.
The device is designed so that V_CCA powers the OE input circuit.OE is connected to GND through a pull-down resistor to ensure a high-impedance state at power-up or power-down.

• No Direction-Control Signal Needed
• Max Data Rates
– 24 Mbps (Push Pull)
– 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoFree™ Package
• 1.65 وی سے 3.6 V on A port and 2.3 وی سے 5.5 V on B port (وی_CCA ≤ V_CCB)
• No Power-Supply Sequencing Required – V_CCA or V_CCB Can Be Ramped First
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• IEC 61000-4-2 ESD (B Port)
– ±8-kV Contact Discharge
– ±10-kV Air-Gap Discharge