TMS320F28335ZHHA-Texas Instruments

Tanım

The TMS320F28335ZHHA device sold by xt-shenzhen is a high-performance microcontroller chip developed and designed by Texas Instruments. The device meets all the requirements of an automotive-grade chip, and has been widely recognized by major automakers around the world in terms of processing speed and product quality. If you want to know more original Texas Instruments chips, please contact xt-zhenhen company to serve you! ! !

TMS320F28335ZHHA adopts Harvard (Harvard) bus architecture design. When encountering equipment failure, it can quickly interrupt the response and processing to better protect equipment safety. TMS320F28335ZHHA'nın yüksek performanslı statik CMOS teknolojisi, 150MHz'e kadar cihaz frekanslarına olanak tanır (6.67ns döngü süresi). Bu ürün serisi, müşterilerin çeşitli uygulama ortamlarını karşılamak için çeşitli ambalaj formları geliştirmiştir., bağımsız olarak sistem geliştirmek isteyen müşteriler için oldukça uygundur..

• Yüksek performanslı 32 bit CPU (TMS320C28x)
– IEEE 754 tek duyarlıklı kayan nokta birimi (FPU) (Yalnızca F2833x)
– Verimli kod (C/C++ ve montaj dilini kullanma)
• 6 kanallı DMA denetleyicisi (ADC için, McBSP, ePWM, XINTF ve SARAM)
• 16 bit veya 32 bit harici arayüz (XINTF)
• Çip üzerinde bellek
• Önyükleme ROM'u (8K × 16)
– Yazılım önyükleme moduna sahiptir (SCI aracılığıyla, SPI, OLABİLMEK, 2C, McBSP, XINTF, ve paralel G/Ç)
– Standart Matematik Tabloları
• Saat ve sistem kontrolü
– Çip üstü osilatör
– Watchdog Timer Module
• GPIO0 to GPIO63 pins can be connected to one of eight external core interrupts
• Peripheral Interrupt Expansion (PIE) module supporting all 58 peripheral interrupts

• 128-bit security key/lock

– Protect flash/OTP/RAM blocks
– Prevent firmware reverse engineering
• Enhanced control peripherals
– Up to 18 PWM outputs
• Three 32-bit CPU timers
• Serial peripherals
– One SPI module – 1 Inter-Integrated Circuit (2C) bus
• 12-bit ADC, 16 kanallar
–80ns conversion rate
–2 × 8 channel input multiplexer
– Twice sample and hold
– Single/simultaneous conversion
– Internal or external benchmarks
• Up to 88 individually programmable multiplexed GPIO pins with input filtering
• Supports JTAG boundary scan
– IEEE Std 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
• Advanced debugging features
– Analysis and breakpoint functions
– Hardware real-time debugging

• Development support includes

–ANSI C/C++ compiler/assembler/linker
– Code Composer Studio™ IDE
–DSP/BIOS™ and SYS/BIOS
– Digital Motor Control and Digital Power Software Libraries
• Low power mode to save energy
– Support idle, standby, shutdown modes
– Disable individual peripheral clocks
• AEC Q100 certified for automotive applications