STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

$1.40

In stock

$1.40

Description

The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, please contact us! ! !

The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.

●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Clock, reset and power management
– 2.0 to 3.6 V application power and I/O
– POR, PDR and programmable voltage
32 kHz oscillator for RTC with calibration
•low power
– Sleep, Stop and Standby modes
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (up to 16 channels)

•DMA

– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug mode
– Serial Wire Debug (SWD) and JTAG interface
• 7 timers
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
– Time generation and emergency stop
– 2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports

frequency72MHz
Supply voltage (DC)2.00V (min)
Operating Voltage2V ~ 3.6V
Number of pins48
Clock frequency72MHz
RAM size20KB
number of digits32
Dissipated power363 mW
FLASH memory capacity128KB
Analog to Digital Conversion (ADC)2
Number of inputs/outputs37 Input
Operating temperature-40℃ ~ 85℃ (TA)
Dissipated power (Max)363 mW
Installation methodSurface Mount
packageLQFP-48
PackingTray

    has been added to your cart:
    Checkout