STM32F103CBT6-STMikroelektronika

STM32F103CBT6-STMikroelektronika

STM32F103CBT6-STMikroelektronika

$1.40

W magazynie

$1.40

Opis

The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, proszę skontaktuj się z nami! ! !

The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.

●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Clock, resetowanie i zarządzanie energią
– 2.0 Do 3.6 V application power and I/O
– POR, PDR and programmable voltage
32 Oscylator kHz dla RTC z kalibracją
•low power
– Sleep, Tryby zatrzymania i gotowości
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (up to 16 channels)

•DMA

– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug mode
– Serial Wire Debug (SWD) i interfejs JTAG
• 7 liczniki czasu
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
Time generation and emergency stop
– 2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports

częstotliwość72MHz
Napięcie zasilania (DC)2.00V (min)
Napięcie robocze2V ~ 3,6 V
Liczba pinów48
Częstotliwość zegara72MHz
Rozmiar pamięci RAM20KB
ilość cyfr32
Rozproszona moc363 mW
Pojemność pamięci FLASH128KB
Konwersja analogowo-cyfrowa (ADC)2
Liczba wejść/wyjść37 Wejście
Temperatura robocza-40℃ ~ 85 ℃ (OKŁADZINA)
Rozproszona moc (Maks)363 mW
Metoda instalacjiMontaż powierzchniowy
pakietLQFP-48
UszczelkaTaca

    został dodany do Twojego koszyka:
    Wymeldować się