SN74AUP1T34QDCKRQ1-정품 Texas Instruments 구입

설명

The SN74AUP1T34QDCKRQ1, designed and developed by Texas Instruments, is a voltage level converter chip used in automobiles. The good performance of the chip has been in a state of short supply, and xt-shenzhen is a supplier that specializes in providing customers with electronic components in short supply. The company has a large inventory of original chips. If you want to buy or learn more original electronic components, 서비스를 제공하려면 xt-shenzhen에 문의하십시오.! ! !

그만큼 SN74AUP1T34QDCKRQ1 is a 1-bit non-inverting converter using two independently configurable power rails. Unidirectional converters switch between A and B ports. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9V to 3.6V
The SN74AUP1T34QDCKRQ1 is suitable for partial power down applications using Ioff. The Ioff circuit disables the output, preventing current backflow from damaging the device when the device is powered off.The VCC isolation feature ensures that the B port is in a high impedance state when the VCCA input is GND.If the VCCB input is on GND, there will be no leakage current from any input on the A side, even when floating.

• Suitable for automotive electronics applications
– Compliant with AEC-Q100
– Device Temperature Grade 1:
-40°C to 125°C ambient operating temperature range
– Device Human Body Model (HBM) 정전기 방전 (ESD) Classification Level 3A
– Charged Device Model (CDM) ESD classification level C5
• Wide operating VCC range of 0.9V to 3.6V
• Equalized propagation delay: tPLH = tPHL (1.8V to 3.3V transition typical)
• Low static power consumption: ICC up to 5μA
• ±6mA output drive (at 3V)
• Ioff supports partial power-down mode operation
• VCC isolation characteristics
• Input hysteresis for input transitions and better switching noise immunity on the input
• Electrostatic discharge (ESD) protection performance exceeds JESD22 specification requirements
• 5000V Human Body Model (AEC-Q100-002-E)
• Latch performance meets 100mA, complies with Q100-004-D specification