STM32F103CBT6-STマイクロエレクトロニクス
$1.40
- 説明
- 問い合わせ
説明
The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, ご連絡ください! ! !
The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.
●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• 時計, リセットと電源管理
– 2.0 に 3.6 V アプリケーション電源と I/O
- による, PDR and programmable voltage
32 キャリブレーション付きRTC用kHz発振器
•low power
– Sleep, Stop and Standby modes
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (まで 16 チャンネル)
•DMA
– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• デバッグモード
– Serial Wire Debug (SWD) and JTAG interface
• 7 タイマー
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
– Time generation and emergency stop
– 2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports
頻度 | 72MHz |
供給電圧 (DC) | 2.00Ⅴ (分) |
動作電圧 | 2V~3.6V |
ピン数 | 48 |
クロック周波数 | 72MHz |
RAMサイズ | 20KB |
桁数 | 32 |
消費電力 | 363 mW |
フラッシュメモリ容量 | 128KB |
アナログからデジタルへの変換 (ADC) | 2 |
入出力数 | 37 入力 |
動作温度 | -40℃~85℃ (フェイシング) |
消費電力 (マックス) | 363 mW |
インストール方法 | 表面実装 |
パッケージ | LQFP-48 |
梱包 | トレイ |