TXS0104ERGYR Texas Instruments Parts
$0.41
- Descrizione
- Inchiesta
Descrizione
IL TXS0104ERGYR electronics were developed by Texas Instruments (DI).It is a 4-bit bidirectional voltage level translator. It is mainly used in open-drain and push-pull applications. XT-ShenZhen has a variety of voltage level translator products in stock. Quality and origin are guaranteed. Please rest assured new and old customers!
The TXS0104ERGYR device is a 4-bit non-inverting converter. It comes with two independently configurable power rails. Its A-side interface is mainly used to track VCCA. vCCA must be less than or equal to VCCB. Its B-side interface is primarily designed to track VCCB.
If the output enable (OE) input is low, all outputs are in a high impedance state.
The device is designed so that VCCA powers the OE input circuit.OE is connected to GND through a pull-down resistor to ensure a high-impedance state at power-up or power-down.
• No Direction-Control Signal Needed
• Max Data Rates
– 24 Mbit/s (Push Pull)
– 2 Mbit/s (Open Drain)
• Available in the Texas Instruments NanoFree™ Package
• 1.65 V a 3.6 V on A port and 2.3 V a 5.5 V on B port (vCCA ≤ VCCB)
• No Power-Supply Sequencing Required – VCCA or VCCB Can Be Ramped First
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• IEC 61000-4-2 ESD (B Port)
– ±8-kV Contact Discharge
– ±10-kV Air-Gap Discharge
Technology Family | TXS |
Applications | SPIO |
Bits (#) | 4 |
High input voltage (min) (Vih) | 1.45 |
High input voltage (Massimo) (Vih) | 5.5 |
Va bene (min) (v) | 1.65 |
Va bene (Massimo) (v) | 5.5 |
IOH (Massimo) (mA) | 0 |
IOL (Massimo) (mA) | 0 |
Valutazione | Catalogare |
Pacchetto | DSBGA (YZT) / NFBGA (NMN) / SEZ (D) / TSSOP (PW) / VQFN (RGY) |
Perni | 12 / 12 / 14 / 14 / 14 |