TXS0102DCTR-Texas Instruments

Keterangan

The TXS0102DCTR device designed and developed by Texas Instruments is a voltage level shifter chip. Excellent performance, favored by the majority of manufacturers.Texas Instruments, as the main product of xt-shenzhen, can supply high-quality electronic components to global manufacturer customers. You are welcome to contact xt-shenzhen company to serve you at any time! ! !

Itu TXS0102DCTR is a bidirectional voltage level translator that can be used to create digital switch compatibility between mixed voltage systems. It uses two independently configurable power rails capable of supporting lower and higher logic signal levels. Pada saat yang sama, the TXS0102DCTR can arbitrarily perform bidirectional conversion between 1.8V, 2.5V, 3.3V and 5V voltage nodes. All inputs/outputs are in a high-impedance state when the output-enable (OE) input is low. To ensure a high-impedance state during power-up or power-down, connect OE to ground through a pull-down resistor.

• No direction control signal required
• Maximum data rate
– 24Mbps (push-pull)
– 2Mbps (open drain)
• Available in Texas Instruments NanoStar™ package
• Port A supports voltage from 1.65V to 3.6V, port B supports voltage from 2.3V to 5.5V (VCCA≤VCCB)
• VCC isolation feature: If either VCC input is grounded (GND), both ports are in a high-impedance state
• Ioff supports partial shutdown mode operation
• Latch-up performance exceeds the 100mA required by the JESD78 Type II specification
• Electrostatic discharge (ESD) protection exceeds the requirements of the JESD22 specification