STM32F103CBT6-STMikroelektronik

STM32F103CBT6-STMikroelektronik

STM32F103CBT6-STMikroelektronik

$1.40

Persediaan

$1.40

Keterangan

The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, silakan hubungi kami! ! !

The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.

●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Clock, reset and power management
2.0 ke 3.6 V application power and I/O
– POR, PDR and programmable voltage
32 Osilator kHz untuk RTC dengan kalibrasi
•low power
– Sleep, Mode Berhenti dan Siaga
–VBATsupply for RTC and backup registers
• 2 x 12-bit, 1 μs A/D converters (hingga 16 channels)

•DMA

– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug mode
– Serial Wire Debug (SWD) dan antarmuka JTAG
• 7 pengatur waktu
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
Time generation and emergency stop
2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports

frekuensi72MHz
Tegangan suplai (DC)2.00V (menit)
Tegangan Operasi2V ~ 3.6V
Jumlah pin48
Frekuensi jam72MHz
ukuran RAM20KB
jumlah digit32
Kekuatan yang hilang363 mW
Kapasitas memori FLASH128KB
Konversi Analog ke Digital (ADC)2
Jumlah masukan/keluaran37 Memasukkan
Suhu Operasional-40℃ ~ 85℃ (MENGHADAPI)
Kekuatan yang hilang (Maks)363 mW
Metode instalasiPermukaan gunung
kemasanLQFP-48
Sedang mengemasBaki

    telah ditambahkan ke keranjang Anda:
    Periksa