Microcontrôleur STM32F303VCT6 STMicroelectronics
$13.30
- La description
- Demande
La description
Le STM32F303VCT6 device is a high-performance MCU from STMicroelectronics. The device integrates a high-performance Arm® Cortex®-M4 32-bit RISC core. The core’s FPU operates at up to 72 MHz. XT-ShenZhen can provide you with brand stock of various MCU products. contact us! We can provide you with a perfect procurement plan.
The STM32F303VCT6 microcontroller is from STMicroelectronics. It is a mainstream mixed-signal ARM Cortex-M4 MCU with DSP and FPU. It also integrates a high-frequency CPU with 256 Ko Flash 72 MHz ultra-high flash.The device also integrates various enhanced I/Os and peripherals connected to the two APB buses. The STM32F303VCT6 device also uses high-speed embedded memory with 256 KB Flash and 40 KB SRAM.
• Core: Arm® Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit)
• Operating conditions:
– VDD, VDDA voltage range: 2.0 V à 3.6 V
• Memories
– 128 à 256 Kbytes of Flash memory
– Jusqu'à 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes.
– Routine booster: 8 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM)
• CRC calculation unit
• Reset and supply management
– Power-on/power-down reset (PAR/RDP)
– Programmable voltage detector (PVD)
– Low-power modes: Sleep, Stop and Standby
– VBAT supply for RTC and backup registers
• Clock management
– 4 à 32 MHz crystal oscillator
– 32 oscillateur kHz pour RTC avec calibrage
– Internal 8 MHz RC with x 16 PLL option
– Internal 40 kHz oscillator
Fréquence | 72 MHz |
Tension d'alimentation (CC) | 2.00V (min) |
Fréquence d'horloge | 72.0 MHz |
Taille de la RAM | 40 Ko |
Nombre de chiffres | 32 |
Puissance dissipée | 488 mW |
Conversion analogique-numérique (ADC) | 4 |
Nombre d'entrées/sorties | 45 Saisir |
Température de fonctionnement (Max) | 85 ℃ |
Température de fonctionnement(Min) | -40 ℃ |
Conversion numérique vers analogique (CAD) | 2 |
Tension | 2V ~ 3,6 V |
Tension d'alimentation (Max) | 3.6 V |
Tension d'alimentation (Min) | 2 V |
Épingles | 100 |
Forfait | LQFP-100 |