STM32F103RCT6-STMicroelectronics
$3.60
- La description
- Demande
La description
The STM32F103RCT6 is a powerful embedded system solution developed by STMicroelectronics. This family of products is ideal for customers who want to develop their own hardware. XT-Shenzhen is an electronic component supplier with actual inventory. Thanks to a strong agency system, xt-shenzhen can provide customers with efficient supply chain solutions! ! !
The STM32F103RCT6 is a highly integrated 32-bit MCU with advanced digital signal processing capabilities. It offers a wide range of peripherals and interfaces, making it suitable for a variety of applications. The STM32 F103 series chips are based on the ARM Cortex M3 core with 256KB Flash, 128KB RAM and 1MB EEPROM. All these features make it suitable for a variety of applications from low power consumption to high performance. Such as industrial automation, medical equipment, électronique automobile, wireless communications, etc.
● Core: Processeur ARM 32 bits Cortex™-M3
− Fréquence de fonctionnement jusqu'à 72 MHz, 1.25DMips/MHz (Dhrystone 2.1), when accessing memory with 0 wait cycles
− Multiplication à cycle unique et division matérielle
● CRC calculation unit, 96 is unique ID
− Three 12-bit, 1µs ADCs (jusqu'à 16 canaux) and two 12-bit 92-channel DACs
● Four general timers, two advanced control timers and two basic timers
● 51 high-speed input and output ports
● Serial wire debugger (SDD) et interface JTAG
● Three SPI, two I2C, five USART, one USB, one SDIO and one CAN interface
● Memory
− Flash program memory from 256K to 512K bytes
− Up to 64K bytes of SRAM
− Flexible static memory controller with 4 chip selects. Support CF card, SRAM, PSRAM, NOR and NAND memory
− Parallel LCD interface, compatible with 8080/6800 mode
● Clock, réinitialisation et gestion de l'alimentation
− 2.0~3.6V power supply and I/O pins
− Réinitialisation à la mise sous/hors tension (PAR/RDP), moniteur de tension programmable (PVD)
− Oscillateur RTC 32kHz avec étalonnage
● Low power consumption
− Sleep, Modes d'arrêt et de veille
− VBAT for RTC and backup registers
fréquence | 72MHz |
Tension d'alimentation (CC) | 2.00V (min) |
Tension de fonctionnement | 2V ~ 3,6 V |
Nombre de broches | 64 |
Fréquence d'horloge | 72.0MHz |
Taille de la RAM | 48Ko |
nombre de chiffres | 32 |
Capacité de la mémoire FLASH | 256Ko |
Conversion analogique-numérique (ADC) | 3 |
Nombre d'entrées/sorties | 51 Saisir |
Température de fonctionnement | -40℃ ~ 85℃ (ORIENTÉ VERS) |
Puissance dissipée (Max) | 444mW |
Conversion numérique vers analogique (CAD) | 2 |
Méthode d'installation | Montage en surface |
emballer | LQFP-64 |
Emballage | Plateau |