Composants de micropuce MCP23S17-E/SS
$2.10
- La description
- Demande
La description
Le MCP23S17-E/SS device is a product of Microchip Corporation. This product is a 16-bit SPI I/O expander with a serial interface. This product has always been very popular in the market! Welcome new and old customers to buy this product from XT-ShenZhen! It will be our great honor!
The MCP23S17-E/SS devices provide 16-bit general purpose parallel I/O expansion for SPI applications. The serial interface of this product differs from the MCP23017 device.
There are multiple 8-bit configuration registers for input, output and polarity selection in MCP23S17-E/SS devices. By writing to the I/O configuration bits (IODIRA/B), the system host can enable I/O as input or output. Input or output registers hold input or output data. The registers can be read by the system host.
• 16-bit remote bidirectional I/O port
– I/O pins default to input
• High-speed I2C™ interface (MCP23017)
– 100 kHz
– 400 kHz
-1.7MHz
• High-speed SPI interface (MCP23S17)
– 10 MHz (max.)
• Three hardware address pins to allow up to eight devices on the bus
• Configurable interrupt output pins
– Configurable as active-high, active-low or open-drain
• INTA and INTB can be configured to operate independently or together
• Polarity Inversion registerto configure the polarity of the input port data
• External Reset input
• Low standby current: 1 μA (max.)
Fréquence | 10 MHz |
Tension de fonctionnement | 1.8V ~ 5,5 V |
La tension de sortie | 1.8V ~ 4.5V |
Courant de sortie | 25 mA |
Courant d'alimentation | 1 mA |
Nombre de canaux | 1 |
Fréquence d'horloge | 10 MHz |
Nombre de chiffres | 16 |
Puissance dissipée | 700 mW |
Nombre d'entrées/sorties | 16 Saisir |
Température de fonctionnement (Max) | 125 ℃ |
Température de fonctionnement(Min) | -40 ℃ |
Tension | 1.8V ~ 5,5 V |
Tension d'alimentation (Max) | 5.5 V |
Tension d'alimentation (Min) | 4.5 V |
Tension d'entrée | 1.8V ~ 5,5 V |
Épingles | 28 |
Forfait | SSOP-28 |