TPS7B8250QDGNRQ1-comprar componentes electrónicos originales de TI
$2.70
- Descripción
- Consulta
Descripción
TPS7B8250QDGNRQ1 is available from Texas Instruments (DE). A low quiescent current voltage regulator chip designed and developed is very suitable for use in many fields of automobiles. It is one of the most in-demand chips on the market. To buy or learn more original electronic components, por favor contáctenos! ! !
TPS7B8250QDGNRQ1 In automotive battery connection applications, low quiescent current is critical to save power and extend battery life. For always-on systems, ultra-low quiescent current must be achieved. The TPS7B8250QDGNRQ1 is a low dropout linear regulator operating over a wide input voltage range of 3V to 40V (45V load dump protection). It can therefore continue to operate under cold starts and starts and stops. With a typical quiescent current of only 2.7μA at light loads, the device is an ideal solution for powering microcontrollers (MCU) and CAN/LIN transceivers in standby systems. With short circuit and overcurrent protection. Además, the device is packaged in a thermally conductive package, allowing long-lasting operation even if the entire device dissipates a lot of heat.
• AEC-Q100 qualified for automotive applications.
• Low quiescent current IQ:
– IQ of 300nA in shutdown mode
– Typical 2.7µA at light load
– 5 μA maximum at light load
• 3V to 40V wide VIN input voltage range, transient voltages up to 45V
• Maximum output current: 300mamá
• The output voltage accuracy is 2%
• Maximum dropout voltage: 700mV at 200mA load current for fixed 5V output version
• Telematics control unit
• Inverter and motor control
Corriente de salida | 0.3A |
drop voltage | 0.4V@200mA,0.2v@100mA |
Voltaje de entrada (máx.) | 40V |
Voltaje de entrada (mínimo) | 3V |
Temperatura de funcionamiento | -40℃-150℃ |
precisión | ±2% |
Metodo de instalacion | Montaje superficial |
Número de pines | 8 |
paquete | PowerPad-MSOP-8 |
Embalaje | Cinta&Reel(TR) |
estándar RoHS | RoHS |