STM32H743VIT6-STMicroelectrónica

Descripción

XT-SHENZHEN, a company specializing in the supply of original electronic components, can provide you with original STM32H743VIT6 devices with its strong original factory channels. The device is designed and developed by the world’s leading STMicroelectronics, and is professionally recognized both in terms of performance and quality. It has been one of the high-end devices in short supply in the market. If you want to know more original electronic components, póngase en contacto con xt-shenzhen para servirle! ! !

los STM32H743VIT6 is a high-performance device based on an operating frequency up to 400 megahercio, featuring an ARM® Cortex®-M7 32-bit RISC core. The Cortex®-M7 core features a floating-point unit (FPU) that supports Arm® double-precision (according to IEEE 754) e instrucciones y tipos de datos de procesamiento de datos de precisión simple. The STM32H743xI series devices support a full set of DSP instructions and a Memory Protection Unit (MPU) to enhance application security. Compared with other products, it has been fully taken care of in terms of performance and safety.

.AXI and multi-AHB bus arrays for interconnecting cores, peripherals and memories
.16 Kbytes+16Kbytes I-cache and D-cache
.Hasta 2 MB embedded dual-block flash memory with ECC and Read-While-Write functions
• 1.62 a 3.6 V application power and I/O
• POR, República Democrática Popular, PVD y BOR
• Dedicated USB power source with embedded 3.3 V internal regulator to power internal PHY
• Embedded Regulator (YO HAGO) with Configurable Scalable Output to Power Digital Circuits
• Voltage scaling in run and stop modes (6 rangos configurables)
• Standby voltage regulator (~0,9 V)
• Voltage reference /VREF+ for analog peripherals
• Low power modes: Dormir, Stop, Standby and VBAT support battery charging low power consumption
• VBAT battery working mode with charging function
• CPU and domain power status monitoring pins
• 2.95 μA in standby mode (backup SRAM off, RTC/LSE on) clock management
• Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI
• External oscillator: 4-48 MHz HSE, 32.768 kHz LSE
• 3× PLLs (1 for system clock, 2 for core clock) with fractional mode