STM32F407VET6-STMicroelectrónica

STM32F407VET6-STMicroelectrónica

STM32F407VET6-STMicroelectrónica

$3.88

En stock

$3.88

Descripción

Designed and developed by STMicroelectronics, the STM32F407VET6 is a 32-bit microcontroller. The device is suitable for motor drives, application controls, industrial applications, and medical equipment, among others. Such a wide range of applications makes the STM32F407VET6 one of the most in-demand chips in the market. As a powerful supplier, xt-shenzhen can provide you with all kinds of chips that are in short supply in the market. If you want to know or buy original chips, XT-Shenzhen is your ideal partner! ! !

los STM32F407VET6 integrates innovative peripherals using a high-performance ARM® Cortex™ M4 microcontroller with Ethernet MAC and camera interface for CMOS sensors. The 32-bit flash MCU features a floating point unit (FPU) with digital signal processing (DSP) instructions and a memory protection unit (MPU) for increased application security.

STM32F407VET6 microcontroller features a crypto/hash processor with hardware acceleration for AES 128, 192, 256, Triple DES and hash (MD5, SHA-1). STMicroelectronics STM32 series is not only fast, but also ultra-low power consumption. Far beyond the performance of similar devices.

●Internal 16 MHz factory trimmed RC (1% accuracy)
32 oscilador kHz para RTC con calibración
●Internal 32 kHz RC with calibration
●Sleep, Stop and Standby modes
●VBAT power supply of RTC, 20×32 bit backup
● Register + optional 4 KB backup SRAM
● Controller with FIFO and burst support
● Depuración de cable serie (SWD) y la interfaz JTAG
●Cortex-M4 Embedded Micromacrocell™
●2 CAN interfaces (2.0B active)
●SDIO interface
●USB 2.0 full speed device/host/OTG
● Controller with on-chip physical layer
USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
● 10/100 Ethernet MAC with dedicated DMA:
●Support IEEE 1588v2 hardware, MII/RMII

frecuencia168megahercio
Tensión de alimentación (corriente continua)1.80V (min)
Tensión de funcionamiento1.8V ~ 3,6 V
Número de pines100
Frecuencia de reloj168megahercio
Tamaño de RAM196KB
número de dígitos32
Capacidad de memoria FLASH512KB
Conversión de analógico a digital (ADC)3
Número de entradas/salidas82 Aporte
Temperatura de funcionamiento-40℃ ~ 85 ℃ (POR)
Conversión de digital a analógico (CAD)1
Metodo de instalacionMontaje superficial
paqueteLQFP-100
EmbalajeBandeja

    SKU: 17600
    Ha sido agregado a tu carro:
    Verificar