STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

STM32F103CBT6-STMicroelectronics

$1.40

Auf Lager

$1.40

Beschreibung

The STM32F103CBT6 32-bit microcontroller is a low-power MCU developed by STMicroelectronics. The chip manufacturing process is very complex, and only a few semiconductor companies in the world have the ability to manufacture it, and it has always been one of the electronic components in short supply. xt-shenzhen has a strong supplier system that can provide customers with STM32F103CBT6 devices from original channels. If you want to know or buy more original electronic components, bitte kontaktieren Sie uns! ! !

The STM32F103CBT6 device is a member of the STM32F1 family developed by STMicroelectronics. It is a low-power chip developed based on the ARM Cortex™ M3 core. Use packaging techniques that are particularly suitable for embedded applications.The device not only uses Cortex-M3 architecture enhancements, but also uses the Thumb-2 instruction set to improve performance.The encoding density has also been greatly improved, and there is a faster response to the special case of sudden device outages. Combining the above advantages, the STM32F103CBT6 device is one of the most popular MCUs in this field.

●pin-to-pin software compatible
SRAM up to 96 Kb
● 32-bit ARM® Cortex®-M3 core
●Can be used for embedded applications
• Uhr, Zurücksetzen und Energieverwaltung
– 2.0 zu 3.6 V Anwendungsleistung und I/O
- VON, PDR and programmable voltage
32 kHz-Oszillator für RTC mit Kalibrierung
•geringer Strom
- Schlafen, Stopp- und Standby-Modus
–VBATsupply for RTC and backup registers
• 2 x 12-Bit, 1 μs A/D-Wandler (bis zu 16 Kanäle)

•DMA

– 7-channel DMA controller
– Peripherals supported: Timer, ADC, SPI, I2C and USART
•Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors, almost all 5V fault tolerant
• Debug-Modus
– Debug für serielle Leitungen (SWD) und JTAG-Schnittstelle
• 7 Timer
– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputs
– 16-bit motor control PWM timer with dead
Time generation and emergency stop
– 2 watchdog timers (independent and windowed)
– SysTick timer 24-bit down counter
•Up to 9 communication ports

Frequenz72MHz
Versorgungsspannung (Gleichstrom)2.00v (Mindest)
Betriebsspannung2V ~ 3,6 V
Anzahl der Stifte48
Taktfrequenz72MHz
RAM-Größe20KB
Anzahl an Ziffern32
Verlustleistung363 mW
FLASH-Speicherkapazität128KB
Analog-Digital-Wandlung (ADC)2
Anzahl Ein-/Ausgänge37 Eingang
Betriebstemperatur-40℃ ~ 85 ℃ (GEGENÜBER)
Verlustleistung (max)363 mW
InstallationsmethodeOberflächenmontage
PaketLQFP-48
VerpackungTablett

    wurde Ihrem Warenkorb hinzugefügt:
    Kasse